Filter
Top Products
The real time can be set.
1. When the radio is switched off
2. If the radio switched on, press DISPLAY button to time status.
3. Press "ENTER" button for more than 2 seconds until " " real time symbol and
4. Set the correct time by pressing the numbered buttons. As you press each
button, the corresponding number will show on the display.
5. If you press wrong button, after pressing the ENTER button. The radio will beep
and "Err" flashed in the display.
6. Press Enter button again to complete the clock setting.
Note:
You may change 24 hour to 12 hour format or vice versa by pressing MODE and
related buttons described later.
In addition to real time, a dual time can be programmed into the radio.
1. Press Real/Dual time button, the Dual time symbol " " will flash.
2. Press ENTER button, display dual time symbol " " will stop flashing.
3. Press ENTER button again for more than 2 seconds until dual time symbol " "
flashes, set the dual time by pressing the numbered buttons.
4. The rest of the operation is same as setting the real time.
Note:
a. To temporarily change between real and dual time mode, press Real/dual
time button. The dual time icon and dual time will be shown in the display..
After approx. 7 seconds, the display will return to show real time.
b. To permanently change the display to dual time, press Real/Dual time
button followed by the ENTER button. " " Dual time icon will appear on the
display.
C. To permanently change the display back to real time mode, press Real/Dual time
button followed by the ENTER button. The " " will be removed from display.
Setting the dual time
4