Filter
Top Products
1.Position the radio face down
2.Press the catch marked " " and slide in the direction shown.
3.Insert the 4 UM-2 (LR6)(AA size) batteries.
4. Replace the battery cover.
Choosing a power supply
Installing batteries
Battery replacement
Low battery warnings
Using the AC adapter
Setting the clock
This radio can be operated using.
4 Alkaline UM-3(LR6)(AA size)batteries.
Household AC adapter(not supplied).
The battery indicator will display the battery condition for approx.7 seconds after the
radio is switched off. If the battery strength indicator is shown below2.the batteries
Should be replaced. After removing the batteries you have approx.3 minutes to
replace the batteries after which clock and memory information will be lost.
1.Replace batteries if display flashes " ".
2.Replace batteries if press power button, the radio still not operate.
Insert the adapter plug into the socket 6V DC on the left side of the radio. Plug the
adapter into a standard mains socket outlet. Whenever the adapter is used, the
batteries are automatically disconnected.
The mains adapter should be disconnected from the mains supply when not in use
for long time.
We would recommend that the receiver operates via the AC adapter whenever
possible, add with battery operation for occasional or stand-by use only.
The clock will start running when the batteries are installed or the adapter is
plugged in. The display will show "0:00" or "AM 12:00" and real time icon.