Filter
Top Products
FM Mono/Stereo
Headphones (or earphones)
Lock switch
Light
DX/Local switch
SW EXT. ANT
To listen to FM stereo broadcasts, tune to the required station, plug in headphones
and set the FM ST./MO. Switch located on the left side of the radio to to FM ST.
(stereo) position, If the station being received is weak some hiss may be audible, to
reduce the hiss, set the switch to FM MO. (mono) position to return to mono
operation.
Note: FM stereo is only available via earphones.
jack plug. Insert the headphones plug into the socket marked on the left side of
the radio. When the headphones are plugged in, the loudspeaker is automatically
disconnected.
The lock switch is used to prevent unintentional operation of the radio.
Set the Lock switch on the right side of the radio to the On position. The Lock icon
will appear in the display. The POWER and all other button will be disabled. This will
prevent accidental operation when the radio is packed in a suitcase or carrying
Pouch. To release the Lock switch, move the switch to OFF position, the LOCK icon
Will be removed from the display.
Press the light button will turn on the light and illuminate the display for approx. 7
seconds after last operation. Or you may turn it off by another press to the light
button.
When listening to SW/FM broadcasting, this switch adjusts the receiver's sensitivity.
When you listen to a strong station and the signal is slightly distorted, set the switch
to the LOCAL position for best reception. For normal or weak stations, set the
switch to the DX position for maximum sensitivity.
To improve SW reception, you can connect an optional external directly to
the SW EXT ANT jack on the left side of the receiver. This automatically
disconnects the receiver's built-in antenna.
Follow the antenna's supplied instructions to connect it to the receiver.
ST
11