Sangean Electronics ATS-505P Portable Radio User Manual


 
Troubleshooting/RESET button
Care and maintenance
Specifications
If the radio fails to operate correctly, or some digits on the display are missing or
incomplete. carry out the following procedure.
1.Switch off the radio and remove the batteries.
2.With the aid of a suitable implement (the end of paper clip or pen), press the
RESET button located at the bottom side for at least 1 seconds, this will reset the
Microprocessor, clock time and clear all stations stored in the preset memory.
Do not allow this radio to be exposed to water, steam or sand. Do not leave the
radio where excessive heat could cause damage such as in a parked car where the
heat from the sun can build up even though outside temperature may no seem too
high.
Frequency range
FM 87.50 - 108 MHz
MW 520 - 1710 or 522 - 1710 kHz
SW 120 m 2.3 -2.495 MHz
90 m 3.2 - 3.4 MHz
75 m 3.85 - 4.0 MHz
60 m 4.75 - 5.06 MHz
49 m 5.9 - 6.2 MHz
41 m 7.1- 7.35 MHz
31 m 9.4 - 9.99 MHz
25 m 11.6 - 12.1 MHz
21 m 13.5 - 13.87 Mhz
19 m 15.1 - 15.8 MHz
16 m 17.48 - 17.9 MHz
15 m 18.9 - 19.02 MHz
13 m 21.45- 21.75 MHz
11 m 25.6 - 26.1 MHz
12