Filter
Top Products
67
Headphone socket
1. A 3.5mm Headphone Socket located on the rear of your radio is
provided for use with headphones. Inserting a plug automatically
mutes the internal loudspeaker.
Please be aware that the sensitivity of headphones can vary widely. We
therefore recommend setting volume to a low level before connecting
headphones to the radio.
IMPORTANT: Excessive sound pressure from earphones and headphones
can cause hearing loss.
Auxiliary input socket (3.5mm Jack)
A 3.5mm Auxiliary Input socket ocated on the rear of your radio is provided
for connecting the audio signal from an external audio source such as an
MP3 or CD player.
1. Connect a stereo lead from the headphone output of your MP3 or
CD player to the Aux In socket. Typically this lead will have a 3.5mm
stereo plug at both ends.
2. Switch on your radio and turn down the volume on the radio to
minimum.
3. Press 'play' on the connected audio device and adjust the volume
using its volume control, leaving the radio at minimum.
4. After use, disconnect your player in order to listen to your radio
conventionally.
Aux In
1
Aux In
WM-202 iss 1.indd 68 20/02/2008 13:04:16