Filter
Top Products
Operating your radio - DAB
1. Carefully extend the telescopic aerial.
2. Press the On/Off button to switch on the radio. The display will show
"loading". If the radio has been used before the last used mode will
be selected.
3. Press the Mode button until the DAB mode is selected on the
display.
4. If this is the first time the radio is used a quick scan of the UK Band III
DAB channels will be carried out The display will show "Scanning". If the
radio has been used before the last used station will be selected.
5. During the scanning process, as new stations are detected the station
counter on the right hand side will increase and stations will be added
to the list. The lower line of the shows a bar graph indicating the
progress of the auto-tune.
6. When scanning is completed the first station (in numeric-alpha order
0....9...A...Z) will be selected.
7. If the station list is still empty after the scan your radio will display
"Service not available".
8. If no signals are found it may be necessary to relocate your radio to
a position giving better reception.
39
3
2
WM-202 iss 1.indd 40 20/02/2008 13:03:55