Filter
Top Products
56
Setting the clock format
The clock display can be set to 12 or 24 hour format. The selected format
is then also used when setting the alarms.
1. Press the On/Off button to switch on your radio.
2. Access the main menu by pressing the Menu button until the 'Main menu'
option is shown, then select this with the Tuning/Select control.
3. Rotate the Tuning/Select control until 'System setup' is highlighted
on the display. Press the control to enter the system setup menu.
4. Rotate the Tuning/Select control until 'Time setup' is highlighted on
the display. Press the control to enter the time setup.
5. Rotate the Tuning/Select control until 'Set 12/24 hour' is highlighted
on the display. Press the control to enter the clock format menu.
6. Rotate the Tuning/Select control to select either 12 or 24 hour format.
Press the control to confirm your choice of clock format. The display
will then revert to the previous menu.
If the 12 hour clock format is chosen, the radio will then use the 12 hour
clock for the setting of alarms, and will display a 12 hour clock with an AM
or PM indicator when in standby mode.
2-6
1
Clock and Alarms .
Set clock
Set date
Auto update
>Set 12/24 hour
Set 12 hour
>Set 24 hour *
06:31:46 PM
21/01/2008
WM-202 iss 1.indd 57 20/02/2008 13:04:09