Filter
Top Products
60
Disabling alarms
1. To disable a single alarm enter the alarm setup menu and rotate the
Tuning/Select control until the desired alarm is highlighted on the
display. Press the Tuning/Select
control.
2. Rotate the Tuning/Select control until the 'On' status mode is
selected.
3. Press and release the Tuning/Select control to change the status so
that the display shows 'Off'.
4. Rotate the Tuning/Select control until the 'Save' option is selected.
5. Press and release the Tuning/Select control save the new setting.
The chosen alarm will now be disabled.
1-5
Snooze function
1. The radio or buzzer alarm can be silenced for 5 minutes by pressing the
Tuning/Select/Snooze control. Should you wish for a longer snooze
duration, this can be extended by means of additional presses of the
control. Each press adds 5 minutes to the snooze duration up to a
maximum of 30 minutes.
2. While the snooze timer is active the remaining snooze time is shown
in the lower line of the clock display in place of the date.
3. In order to cancel the Snooze function, press the On/Off button twice
in succession (or once to simply switch on the radio).
Clock and Alarms .
WM-202 iss 1.indd 61 20/02/2008 13:04:12