Filter
Top Products
WARNING
Under no circumstances should you try to repair the unit yourself as this
will invalidate the warranty. Do not open the unit as there is a risk of
electric shock.
If a fault occurs, first check the points listed before taking the unit for
repair. If you are unable to solve a problem by following these hints,
consult your dealer or service center.
Problem Solution
Disc does not playback. – Make sure the correct program number (channel number) for the Streamium
System has been selected on the TV.
– Make sure the Streamium System and the TV are connected properly.
– Make sure the disc is not scratched or dirty. Replace or clean the disc.
– Make sure the disc has been inserted, printed side up.
– Make sure you have inserted the right disc type: DVD, (Super) Video CD,
Audio CD, CDR(W) or MP3-CD.
– Make sure the region code of the DVD matches the Streamium System.
– Change the Parental level (See “Access control”).
– Press SYSTEM MENU to exit the system menu.
Cannot activate some features, – The features may not be available on the disc.Try another disc.
such as angles, subtitles or
multi-language Audio.
No sound or distorted sound – Adjust the volume.
– Check the speaker connections and settings.
– Disconnect the headphones.
– Press 2OK to resume normal playback.
– Press the corresponding source button on the remote control (DVD,
INTERNET, …) to choose the source you want to hear through the
Streamium System.
No sound from the center and/or – Make sure the center and surround speakers are connected correctly.
surround speakers. – Press SURROUND on the remote control to select another surround effect.
No digital surround sound – Make sure the selected source (inserted disc, Internet media, …) supports
digital surround sound (Dolby Digital, DTS, MPEG).
– Make sure external exquipment that plays digital surround sound is
connected to DIGITAL IN.
Radio reception is poor. – If the signal is too weak, adjust the antenna or connect an external antenna
for better reception.
– Place the antenna farther away from other equipment (TV,VCR, digital
equipment, …) that may disturb radio reception.
– Increase the distance between the Streamium System and your TV or VCR.
The remote control does not function – Press the desired source button on the remote control (DVD,
properly. INTERNET, …), then press the desired function button (e. g. 2OK, T).
The Streamium System does not – Unplug the power cord and wait at least 10 seconds before reconnecting
respond to any of the buttons,including the unit.
the standby button.
Troubleshooting
46
English