Filter
Top Products
Internet and PC Link
Please visit http://My.Philips.com 25
English
D) PC only with a network
interface (Ethernet) card
Follow these instructions if you want to connect the
Streamium System directly to your PC without using a
wireless connection.
1 Connect ETHERNET on the Streamium System to the
ethernet jack of the PC with a cross over ethernet cable
(not supplied).
Only use a cross over ethernet cable to connect the
Streamium System directly to the PC.
2 If necessary, switch on your PC.
3 Wait for 10 seconds, then press PC LINK on the remote
control.
➜ If the Streamium System connects to the PC, the
computer name of your PC will be displayed.
If the Streamium System does not connect to
the PC
The Streamium System may not connect to the PC
because
– a connection error has occurred. Press PC LINK again.
– you have not yet installed the Philips Media Manager
software on your PC.
– the PC is switched off.
– the IP address of the Streamium System and that of your
PC are not in the same subnet.
cross over
ethernet cable