Filter
Top Products
59
Manual setting
1 Turn on the unit, if necessary.
2 From Home screen, select [Settings] >
[Clock settings] >[Date and time].
Or, press • SETTINGSon the remote
control to enter [Settings].
3 In [Date and time], select [Current date
and time] > [Manual].
4 To enter date and time,
Press •
or to select the entry
location;
Use the alphanumeric buttons to •
enter desired digits;
Press • OK to confirm.
You can also press •
or
repeatedly, or press and hold or
until the desired digit appears.
Set date/time format
Select how date and time are displayed in the
clock.
1 Follow Step 1-2 under “Manual setting”.
2 In [Date and time], go to [Time format]
or [Date format] to select options.
Network settings
Setup network
After the first-time setup, you can change how
MCi8080 connectsto home Wi-Fi/wired network:
Switch between different connection •
methods (wireless or wired,
automatic or manual);
Switch between different routers.•
To do so, do the following:
1 From Home screen, go to [Settings] >
[Network settings] > [Setup network].
Or, press • SETTINGS on the remote
control to enter [Settings].
Tip
According to the location and time zone you •
select, the unit can have the clock time set
and adjusted automatically through the online
service over the Internet.
To check and change current location and time
•
zone, go to [Settings] > [Location and time
zone].
Through time signals from FM RDS radio
1 On the unit, turn on the FM radio, if
necessary.
Ensure that the FM antenna is •
connected properly CA-MCI8080-
Connect the FM antenna (see
‘Connect the FM antenna’ on page
23).
2 On the first location for preset stations,
store an FM RDS station that transmits
time signals.
3 From Home screen, select [Settings] >
[Clock settings] > [Date and time].
Or, press • SETTINGSon the remote
control to enter [Settings].
4 In [Date and time], select [Current date
and time] > [Automatic (RDS)].
The unit searches for the first preset »
station automatically.
The time is set according to time »
signals from the station.
13
Automatic (Internet)
Automatic (RDS)
Manual
English
EN