Filter
Top Products
m How to connect and setup
1
Confirm the connecting and setting.
1. Connect the HDMI OUT jack to the HDMI input
jack of the TV.
Blu-ray Oisc/OVO player, etc.
HDMI
connection
[=AV receivej
DIGITALAUDIO _ _ HDMI
connection connection
(OPTICAL)
2
TV, projector, etc.
2. Connect the audio output from the TV to the
OPTICAL IN 2 jack of the AV receiver using an
optical digital cable.
• When the audio return channel (ARC) function isused with
an ARC capable TV, this connection is not necessary
(÷ page 42).
3. Connect the HDMI output of the Blu-ray
Disc/DVD player/recorder to the HDMI IN 1 jack
of the AV receiver.
• It is necessary to assign the HDM[ input when connecting
the Blu-ray Disc/DVD player/recorder to other jacks
(_ page 35). Do not assign the components connected to
the HDM[ IN to the TV/CD input at this time. Appropriate
CEC (Consumer Electronics Control) operation can not be
guaranteed.
Each of tile "HDMI Setup" is changed to the
following setting.
• HDMI Ctrl (RIHD): On
• Audio Return Ch (ARC): Auto
See details of each setting (@ page 42).
3 Confirm the settings.
1. Turn on the power for all connected components.
2. Turn off the power of the TV, and confirm that
the power of the connected components is turned
off automatically with the link operation.
3. Turn on the power of the Blu-ray Disc/DVD
player/recorder.
4. Start playback of the Blu-ray Disc/DVD
player/recorder, and confirm the following.
• The power of the AV receiver is turned on
automatically, and input with the Blu-ray
Disc/DVD player/recorder connected is
selected.
• The power of the TV is turned on
automatically, and input with the AV receiver
connected is selected.
5. Following the operating instructions of the TV,
select "Use the TV speakers" from the menu
screen of the TV, and confirm that the audio is
output from the speakers of the TV, and not from
the speakers connected to the AV receiver.
6. Select "Use the speakers connected from the AV
receiver" from the menu screen of the TV, and
confirm that the audio is output from the speakers
connected to the AV receiver, and not from the
TV speakers.
• Perform the above operations when you initially use the
AV receiver, when the settings of each component are
changed, when the main power of each component is
turned off, when the power cable is disconnected from the
power supply, or when there has been a power outage.
4 Operate with the remote controller.
For buttons that can be operated (@ page 47).
• Audio from DVD-Audio or Super Audio CD may not
output from the TV speakers. You will be able to output the
audio from the TV speakers by setting the audio output of
the DVD player to 2ch PCM. (It may not be possible
depending on the player models.)
• Even if you set to output audio on the TV speakers, audio
will be output from the speakers connected to the AV
receiver when you adjust the volume or switch the input on
the AV receiver. To output audio from the TV speakers, re-
do the operations on the TV.
• Do not connect the 1-41cable when connecting to the 1-41
and I-41audio control compatible components.
• When you select anything other than the HDM[jack where
the AV receiver isconnected as the input on the TV, input
on the AV receiver will be switched to "TV/CD".
• The AV receiver will automatically power on in
conjunction when it determines it to be necessary. Even if
the AV receiver is connected to an r411-I1_ compatible
TV or player/recorder, it will not power on if it is not
necessary. It may not power on in conjunction when the TV
is set to output audio from the TV.
• Linked functions with the AV receiver may not work
depending on the model. Operate the AV receiver directly
in such cases.
ED
58