Filter
Top Products
You can temporarily mute the output of the AV receiver.
1 Press RECEIVER followed by MUTING.
The output is muted and the MUTING indicator
flashes on the display.
• To tmmute, press MUTING again o1"adjust the volume.
• The mute is cancelled when the AV receiver is set to
Standby.
Recording Separate AV Sources
Here you can record audio and video from completely
separate sources, allowing you to overdub audio onto your
video recordings. This function takes advantage of the fact
that when an audio-only input source (TV/CD) is selected,
the video input source remains unchanged.
In the following example, audio from the CD player
connected to the TV/CD IN and video from the camcorder
connected to the AUX INPUT VIDEO are recorded by the
VCR connected to the VCR/DVR OUT jacks.
Connect a pair of stereo headphones with a
standard plug (1/4 inch or 6.3 ram) to the
PHONES jack.
• Always turn down the volume before connecting your
headphones.
• While the headphones plug is inserted ill the PHONES
jack, the speakers are turned off.
• When you connect a pair of headphones, the listening mode
is set to Stereo, unless it's already set to Stereo, Mono, or
Direct.
This section explains how to record the selected input
source to a component with recording capability, and how
to record audio and video from different sources.
AV Recording
Audio sources can be recorded to a recorder (e.g., cassette
tape deck, CDR, MD recorder). Video sources can be
recorded to a video recorder (e.g., VCR, DVD recorder).
2
3
1
Use the input selector buttons to select the source
that you want to record. 2
You can watch the source while recording. The AV
receiver's MASTER VOLUME control has no effect 3
on recording. 4
On your recorder, start recording.
On the source component, start playback.
If you select another input source during recording,
that input source will be recorded.
5
L
L
CD player VCR
A:= : Video signal
: Audio signal
_1
Prepare the camcorder and CD player for
playback.
Prepare the VCR for recording.
Press AUX input selector.
Press TV/CD input selector.
This selects the CD player as the audio source, but
leaves the camcorder as the video source.
Start recording on the VCR and start playback on
the camcorder and CD player.
The video from the camcorder and the audio from the
CD player are recorded by the VCR.
ED
33