Filter
Top Products
Using an RIHD-compatible TV, Player, or Recorder
1-41I-IlD, which stands for Remote Interactive over HDMI, is the name of the system control function found on Onkyo
components. The AV receiver can be used with CEC (Consumer Electronics Control), which allows system control over
HDMI and is part of the HDMI standard. CEC provides interoperability between various components, however,
operation with components other than 1-41l-llD-compatible components cannot be guaranteed.
The following components are 1-41l-llD-compatible. (As
of January 2011 )
NTV
• Toshiba REGZA-LINK compatible TV
• Sharp TV
@Players/Recorders
• Onkyo and Integra r4ll-IlD compatible players
• Toshiba REGZA LINK compatible players and
recorders (only when used together with Toshiba
REGZA LINK compatible TV)
• Sharp players and recorders (only when used together
with Sharp TV)
* Models other than those mentioned above may have some
interoperability if compatible with CEC which is part of the
HDM[ Standard, but operation cannot be guaranteed.
• Do not connect the r-'411-llD-compatible component more than
the following number to the HDM[ input terminal so that the
linked operations work properly.
-Blu-ray Disc/DVD player is up to three.
-Blu-ray Disc recorder/DVD recorder/Digital Video Recorder
is up to three.
- Cable/Satellite Set-top box is up to four.
• Do not connect the AV receiver to the other AV receiveffAV
amplifier via HDM[.
• When the r"411-llD-compatible component more than the
above-mentioned is connected, the linked operations are not
guaranteed.
@ For r-UHO-compatible TV
The following linked operation is possible by connecting
the AV receiver to an _Jl-llD-compatible TV.
• The AV receiver will enter Standby mode when the
power of the TV is turned to Standby.
• You can set on the menu screen of the TV to either
output the audio from the speakers connected to the AV
receiver, or from the speakers of the TV.
• It is possible to output the video/audio from the antenna
or from the input jack of the TV from the speakers
connected to the AV receiver. (A connection such as
optical digital cable or similar is required above the
HDMI cable.)
• Input to the AV receiver can be selected with the remote
controller of the TV.
• Operations such as volume adjustment or similar for the
AV receiver can be performed from the remote
controller of the TV.
@ For r-UHO-compatible players/recorders
The following link operation is possible by connecting the
AV receiver to an _ l-liD-compatible player/recorder,
• When the playback is started on the player/recorder,
input of the AV receiver will switch to the HDMI input
of the player/recorder that is playing back,
• Operation of the player/recorder is possible with the
remote controller supplied with the AV receiver,
* Not all functions may operate depending on the model.
En
57