Filter
Top Products
- 29 -
4. Press and release the F.FWD/+ button or
2. With Preset flashing, press and release the
F.FWD/+ button
repeatedly
until Batt type is
displayed.
3. Press and release the MENU button
.
The Batt type
choice will flash.
4. Press and release the F.FWD+ button
to
tab through the
Battery type
choices.
1. From stop, press and hold the
MENU/
STORE button for about 2 seconds. Preset
will appear (flashing) in the display.
the -/F.REV
button
to
toggle between
Yes and No.
5. When the desired state appears, press and
release the ENTER button
.The display
returns to
A.PowOff
flashing.
You can:
• Press and release the F.FWD/+ button
or the -/
F.REV button
to tab to another menu choice, or
• Press and release the
MENU/STORE button to write
the menu changes and return to stop mode, or
• Press and release the CANCEL button
to cancel all
menu changes and return to stop mode.
Battery Type
The PMD671 can operate on 8 standard AA size
Alkaline, Ni-Cd or Ni-MH batteries.
An optional Ni-Cd battery pack (Model RB1100
available from Marantz Professional) will be
charged by the built-in charger when the AC
adaptor is plugged in.
An optional Ni-MH battery pack (Model RB1651
available from Marantz Professional) will be
charged by the built-in charger when the AC
adaptor is plugged in.
The Battery Type setting is used for the battery
indicator in the display and "Low Battery" warn-
ing. If the setting does not match installed batter-
ies the PMD671 will not show the appropriate
battery status.
Example
display
5. With the desired battery type displayed, press
and release the ENTER button
.The
display returns to
Batt type flash-
ing.
You can:
• Press and release the F.FWD/+ button
or the -/
F.REV button
to tab to another menu choice, or
• Press and release the
MENU/STORE button to write
the menu changes and return to stop mode, or
• Press and release the CANCEL button
to cancel all
menu changes and return to stop mode.
Default is Alkaline.
How to set or change Battery Type
Quick instructions
Press & hold
MENU/STORE 2 sec ....... Preset
Press F.FWD/+
5X.......................... Batt type
Press ENTER
............... battery type flashing
Press F.FWD/+
........... tab thru battery types
Press ENTER
................................. Batt type
Press
MENU/STORE .................... store & exit