Filter
Top Products
- 20 -
MARK
EDIT
Renumber is flash-
ing in the display.
While Renumber is flashing (3 seconds) press
and release the ENTER button
. (Or press
and release the STOP button
to cancel.)
ENTER button
to confirm.
ing will increase to 100%.
Renumber is flash-
ing in the display.
While Renumber is flashing (3 seconds) press
and release the MARK/
EDIT button again.
TrkERASE is flash-
ing in the display.
While TrkERASE is flashing (3 seconds) press
and release the ENTER button
.
Renum OK? will
be flashing. Press
and release the
EXECUTING will be
displayed, and the
percentage execut-
display will return to stop mode.
How to erase tracks
From stop, press and hold the MARK/ EDIT
button for about 2 seconds to enter Edit mode.
100% done will be
displayed momen-
tarily. The
PMD671 and the
How to renumber tracks
If you have erased tracks from the CF card it is
easier to locate recordings if the tracks are
renumbered.
EDIT button
Press and hold the
EDIT button for
about 2 seconds to
enter Edit mode.
Edit mode
Edit mode includes: Renumber (renumber
tracks), TrkERASE (erase a track), TrkMkERASE
(erase an EDL mark), AllMkERASE (erase all
EDL marks), FORMAT (format the CF card), and
CARD CHECK.
From stop, press and hold the MARK/
EDIT
button for about 2 seconds to enter Edit mode.
Track number is
flashing in the
ERASE display.
Press and release the F.FWD/+ button
or the
-/F.REV button
to select the track number
you want to erase.
Example track
34.
While the track to be erased is flashing (3 sec-
onds), press and release the ENTER button
.
(Or press and release the STOP button
to
cancel.)
EXECUTING will be
displayed momen-
tarily.
Done will be dis-
played momentarily.
The PMD671 and
the display will
return to the first
track so you can choose to erase another track.
The recording time (file space on the CF card)
used by the erased track is available for record-
ing.
Press and release the STOP button
to exit.