Filter
Top Products
MARK
TIMETRACK
-dB
00 40 20 12 6 2 0 over
-dB
R
L
- 19 -
Skip
An EDL Mark changed to 'Skip' will be skipped
during EDL playback (playback with EDL PLAY
switch at ON). Playback will skip to the beginning
of the next EDL Mark.
A skipped EDL recording is not erased. The
recording is still on the CF card. The skipped EDL
recording will play if the EDL PLAY switch is at
OFF. You can change the type later.
EDL A-B looping
To playback an EDL A-B loop, press the PLAY/
PAUSE button
to begin playback, then press
and release the A-B REPEAT button.
If there is an error, for example there is an EDL
Mark of type Loop_A but no EDL Mark of type
Loop_B, an error message is displayed.
Only one EDL A-B loop can programmed. When
a 'Loop_A' or 'Loop_B' exists on a CF card and
another is created, the old mark automatically
changes to a 'Skip'.
Erase
When an EDL mark is erased, the remaining EDL
marks are automatically renumbered from 1
through the number of EDL marks on the CF
card.
TRACK
TIMETRACK
-dB
00
40
20 12
62
0
over
-dB
R
L
Example
display
Edit functions: editing EDL Marks to create
custom playback sequences, erasing and renum-
bering Tracks, and formatting the CF card.
Custom playback sequences
EDL Marks are numbered consecutively from
001 and automatically renumbered when an
EDL Mark is added or erased. Playback is also
consecutive from the point that playback begins.
EDL Mark custom playback can:
Skip playback from the beginning of a 'Skip' EDL
Mark to the beginning of the next EDL Mark.
A-B loop from a 'Loop_A' EDL Mark to a 'Loop_B'
EDL Mark.
EDL Marks are not automatically placed at the
beginning of tracks. If you want your custom
playback sequence to include track beginning
points, add EDL Marks to coincide with track
beginning points:
a. Start playback by pressing and releasing
PLAY/Pause
, and then pause playback
by pressing and releasing PLAY/Pause
again.
b. Press and release TRACK JUMP forward
or TRACK JUMP reverse until the de-
sired track number is displayed.
c. Press and release the MARK/
EDIT button.
Editing EDL Marks:
All EDL Marks are initially entered as 'Point'
marks.
From Stop display the EDL Mark by pressing and
releasing the Mark forward button (18) or Mark
reverse button (16) to tab through the EDL marks
on the CF card.
When the EDL mark to be edited is displayed,
press and release the MARK/
EDIT button. The
current EDL Mark type will be flashing.
Writing will be displayed briefly, and the PMD671
will return to stop mode.
MARK
TIMETRACK
-dB
00 40 20 12 6 2 0 over
-dB
R
L
Example
display
Press and release the MARK/
EDIT button to
tab through the EDL Mark types: Point, Skip,
Loop_A, Loop_B and Erase. When the type you
want is flashing, press and release the ENTER
button
.