Filter
Top Products
26
Getting started
Basic connections Basic operation Specifications IndexAdvanced connections Advanced operations Explanation of terms Troubleshooting
ENGLISH
26
Getting started
Basic connections Basic operation Specifications IndexAdvanced connections Advanced operations Explanation of termsAdvanced operations Troubleshooting
Performing menu settings
n File Info (File information display selection)
When [TEXT] is pressed while playing iPod files on the unit, file
information is shown on the display.
Here, you can set which information is displayed first when [TEXT]
is pressed.
1
Select “iPod Setup=>” using
[8]
and
[9]
, and
press [ENTER].
2
Select “File info=>” using
[8]
and
[9]
, and
press [ENTER].
3
Select the information you want to display rst using
[8] and [9], and press [ENTER].
GSelectable itemsH
1 Title
The track name is displayed.
2 Artist
The artist name is displayed.
3 Album
The album name is displayed.
4 Time
The time information is displayed.
4
Press [MENU].
The settings are saved, and the display returns to normal.
NOTE
When “iPod Ctrl=>” is set to “1 Direct”, the display order of file
information cannot be changed.
n Buttons that can be used when playing back
from an iPod
Remote control
buttons
Operation on the unit
1
Plays the track
3
Pause
2
Return to the first track in the folder
8, 9
Skip to previous or next track
Fast forward and rewind cannot be used
REPEAT
Switches the repeat function
RANDOM
Switches the shuffle function
AMS
Plays the first approximately 10 seconds of
the track, then skips to the next track
TEXT
Switches the display
n
iPod Ctrl (Operating an iPod with its own controls)
You can set whether to perform iPod operations using the iPod
controls, or using the unit remote control.
1
Select “iPod Setup=>” using
[8]
and
[9]
, and
press [ENTER].
2
Select “iPod Ctrl=>” using
[8]
and
[9]
, and
press [ENTER].
3
Select the device you want to operate using [8]
and [9], and press [ENTER].
GSelectable itemsH
1 Direct
In this mode, the iPod controls are operated directly
while looking at the iPod display screen.
2 Remote
In this mode, the iPod is operated while the iPod
information is shown on the unit display.
Display mode
1 Direct 2 Remote
Display location iPod display Unit display
Playable
files
Audio file
S S
Video file
S
z
A
Active
buttons
Remote control
and this unit
S S
iPod
S A
z Only audio is played back.
•For details on how to playback when “2 Remote” is set, see
“Database (iPod database selection)” (vpage25).
4
Press [MENU].
The settings are saved, and the display returns to normal.
When “1 Direct” is set, playback, pause, skip and stop can be
performed using the unit remote control.
NOTE
1st generation iPod nano or iPod with Video do not support “1 Direct”.
When a 1st generation iPod nano or iPod with Video is connected, the
mode automatically switches to “2 Remote”.
n Resume (Resume playback settings)
You can set whether to record the place where playback is stopped.
When resume playback is set to on, this unit starts iPod playback
from the start of the file that was previously being played.
1
Select “iPod Setup=>” using
[8]
and
[9]
, and
press [ENTER].
2
Select “Resume=>” using
[8]
and
[9]
, and
press [ENTER].
3
Select “1 Off” or “2 On” for the resume playback
settings using
[8]
and
[9]
, and press [ENTER].
GSelectable itemsH
1 Off
Resume playback is not set.
2 On
Resume playback is set.
4
Press [MENU].
The settings are saved, and the display returns to normal.
NOTE
Resume playback cannot be used if 2 is pressed to stop the iPod.
Press
3 to pause the track. Even if the input source is changed or the
unit power is switched off, when the iPod is played again, playback
starts from the start of the track that was previously being played
back.
1.CD6004U_ENG_02A_0706.indd 26 2011/07/14 15:56:44