Filter
Top Products
20
Getting started
Basic connections Basic operation Specifications IndexAdvanced connections Advanced operations Explanation of terms Troubleshooting
ENGLISH
20
Getting started
Basic connections Basic operation Specifications IndexAdvanced connections Advanced operations Explanation of termsAdvanced operations Troubleshooting
Switching the time display
During playback, press [TIME].
The time display changes in the following order each time [TIME] is
pressed.
(Not displayed)
Track elapsed time
REMAIN
Track remaining time
NOTE
•When a USB memory device is connected to this unit, the files
recorded on the USB memory device are read. The read time differs
depending on the amount of data stored on the USB memory device.
If the maximum number of playable files or folders are stored on the
USB memory device, it may take a few minutes to read the files.
•Before turning off the power supply to the unit, make sure the USB
memory device is stopped or paused.
•If a USB memory device is connected to this unit, marantz cannot
be held responsible for the loss or damage to any data stored on the
USB memory device.
•The USB memory device will not operate if connected through a
USB hub.
•Operation or power supply to all types of USB memory device
cannot be guaranteed.
Removing the USB memory device
1
Press 2 or 3 to stop playback.
2
Check that the communication indicator on the USB
memory device is not ashing, then pull out the USB
memory device.
NOTE
Do not remove the USB memory device from the unit when the USB
memory communication indicator is flashing. Doing so may damage
the USB memory device, or may corrupt the files recorded on the USB
memory device.
Performing menu settings
You can set the following functions.
For details, see each of the explanation pages.
Menu operations
1
During stop mode, press [MENU].
The menu is shown on the unit display.
2
Press
[8] or [9]
to select the menu item you
want to set.
3
Press [ENTER] to enter the settings.
•Press [CANCEL] to return to the previous item.
•To exit the menu, press [MENU] when the menu is being displayed.
The menu disappears.
Selectable mode
CD D-OUT (CD digital output settings) (vpage20)
USB OUT (USB audio output settings) (vpage20)
Timer Play (Timer play setting) (vpage21)
CD Setup (Operating MP3, WMA and AAC files recorded on
the disc) (vpage22)
USB Setup (USB memory device operation) (vpage23)
iPod Setup (iPod operation) (vpage25)
Auto STB (Auto standby function) (vpage27)
CD D-OUT (CD digital output settings)
Sets digital output for CD playback ON/OFF.
1
Select “CD D-OUT=>” using [8] and [9], and
press [ENTER].
2
Set digital output to “1 On” or “2 Off” using [8]
and [9], and press [ENTER].
GSelectable itemsH
1 On
Output is digital.
2 Off
Output is not digital.
3
Press [MENU].
The settings are saved, and the display returns to normal.
USB OUT (USB audio output settings)
For USB/iPod audio output, select either the digital output connector
or the analog output connector.
1
Select “USB OUT=>” using [8] and [9], and
press [ENTER].
2
Select the output connector using [8] and [9],
and press [ENTER].
GSelectable itemsH
1 Analog
Outputs audio from the analog output connector of
the unit. Audio is not output from the digital output
connector.
2 Digital
Outputs audio from the digital output connector of
the unit. Audio is not output from the analog output
connector.
3
Press [MENU].
The settings are saved, and the display returns to normal.
Playing a USB memory device
1.CD6004U_ENG_02A_0706.indd 20 2011/07/14 15:56:41