Filter
Top Products
17
ENGLISH
17
Playback iPod
®
With the unit, you can listen to music on an iPod and you can also
operate the iPod with the main unit or the remote control.
“Made for iPod” and “Made for iPhone” mean that an electronic
accessory has been designed to connect specifi cally to iPod or
iPhone, respectively, and has been certifi ed by the developer to
meet Apple performance standards. Apple is not responsible for the
operation of this device or its compliance with safety and regulatory
standards.
iPhone, iPod, iPod classic, iPod nano, iPod shuffl e, and iPod touch
are trademarks of Apple Inc., registered in the U.S. and other
countries.
•Individual users are permitted to use iPhone, iPod, iPod classic, iPod
nano, iPod shuffl e, and iPod touch for private copy and playback of
non-copyrighted contents and contents whose copy and playback is
permitted by law. Copyright infringement is prohibited by law.
Playing an iPod
®
1
Press <ON/STANDBY>.
2
Connect the iPod to the USB port on the front panel
of this unit (vpage 14).
3
Press <DISC/INPUT> to change the input source to
“USB”.
4
Select the le that you want to playback on the iPod.
NOTE
•1st generation iPod nano and iPod with Video devices cannot
be controlled from the iPod. Use the “Database (iPod database
selection)” (vpage25) operation to playback iPod fi les.
•If the iPod cannot be operated with its own controls, refer to “iPod
Ctrl (Operating an iPod with its own controls)” (vpage26) and
change “iPod Ctrl=>” to “1 Direct”.
•Before turning off the power supply to the unit, make sure the iPod
is stopped or paused.
•marantz cannot be held responsible for the loss or damage to any
data stored on the iPod.
•This unit operations may not be available depending on the iPod
software version.
Buttons that can be used when playing back from
an iPod
Remote
control
buttons
iPod buttons Operation on the unit
1 13
Plays the track
3 13
Pause
2
– Return to the fi rst track in the folder
8, 9 8, 9
Skip to previous or next track
Fast forward and rewind cannot be
used.
Selecting the operating mode
You can set whether to perform iPod operations using the iPod
controls, or using the unit remote control.
For details on the settings, see “iPod Ctrl (Operating an iPod with its
own controls)” (vpage26).
Button located on both the main unit and
the remote control
BUTTON
Button only on the main unit
<BUTTON>
Button only on the remote control
[BUTTON]
Symbols used to indicate buttons in this manual
<DISC/INPUT>
<8/6>
<7/9>
<ON/STANDBY>
2 1 3
USB port
3
1
2
[8, 9]
[TEXT] [TIME]
1.CD6004U_ENG_02A_0706.indd 17 2011/07/14 15:56:39