Filter
Top Products
8
Getting started
Basic connections Basic operation Specifi cations IndexAdvanced connections Advanced operations Explanation of terms Troubleshooting
ENGLISH
8
Getting started
Basic operationBasic operation Specifi cations IndexAdvanced connections Advanced operations Explanation of terms TroubleshootingBasic connections
Basic operation
This chapter explains the procedures required to playback a CD,
and the various operations that can be performed during CD
playback.
For other operations, see the sections below.
n Playback of MP3, WMA and AAC fi les (vpage15)
n Playback iPod
®
(vpage17)
n Playing a USB memory device (vpage18)
n Performing menu settings (vpage20)
Before use
Set the power to standby
Press <ON/STANDBY> or [POWER].
Power is set to standby and the power indicator lights.
Before setting power to standby, make sure the disc tray is completely
closed.
NOTE
•Do not force the tray in by hand while power is set to standby. This
could cause a trouble.
•Even when power is set to standby, electrical current passes through
some circuits. If you do not intend to use the unit for an extended
period of time, unplug the power cord from the household power
outlet.
Switching the input source
This unit supports the following playback functions in addition to disc
playback.
•Playing fi les from USB memory from the front panel USB port.
•Playing iPod fi les from the front panel USB port.
Before playing back fi les from a connected device, perform the
following operation to switch the input source.
Press <DISC/INPUT> to select the input source.
The input source changes in the following order each time <DISC/
INPUT>
is pressed.
Disc USB
GSelectable itemsH
Disc
Playback the disc inside the disc tray (vpage9).
USB
Playback fi les on the device connected to the front
panel USB port (iPod/USB) (vpage17,18).
Button located on both the main unit and
the remote control
BUTTON
Button only on the main unit
<BUTTON>
Button only on the remote control
[BUTTON]
Symbols used to indicate buttons in this manual
<ON/STANDBY> <DISC/INPUT>
Power indicator
[POWER]
1.CD6004U_ENG_02A_0706.indd 8 2011/07/14 15:56:31