Filter
Top Products
English49
Troubleshooting
In the case of a trouble such as the impossibility of switching this unit ON, spontaneous
power shutdown or erroneous display, press the Reset button (page 8).
For details, refer to the support information in our website by visiting:
http://www.kenwood.com/
Symptom Remedy
Power cannot be switched ON or pressing a
button does not start an operation.
The HOLD function is ON.
Cancel the HOLD function with the HOLD switch on this unit (page 12).
The battery is nearly exhausted.
Connect the provided AC adapter to this unit to recharge the battery. (page
13)
Press and hold the power button until this unit is switched on.
This unit is being connected to the PC.
This unit is inoperable when it is connected to the PC in the storage mode.
The remaining battery power drops soon
after recharging.
The rechargeable battery is degraded.
Replace it with a brand-new rechargeable battery.
For the battery replacement, contact your nearest Kenwood service agent.
Audio is not heard. Headphones are connected improperly.
Connect headphones correctly to this unit.
Battery cannot be recharged. USB cable is connected improperly.
Check the connections on both this unit and PC sides.
The ambient temperature is outside the operating temperature range.
The battery should be recharged within the operating temperature range.
(page 47)
PC does not recognize this unit. USB cable is defective.
Purchase and use another USB cable.
This unit is connected to the PC improperly.
Check the connection between this unit and PC.
Recording on the SD card, file movement
on/from it or file deletion from it is
impossible.
The LOCK switch on the SD card is set to the "LOCK" position.
Unlock the write protection of the SD card. (page 5)
Recording from a line input is impossible. A plug is connected to the microphone input.
Do not connect anything to the microphone input terminal. (page 25)
Recording from an external microphone
is impossible.
The PLUG IN POWER switch is set to OFF.
A condenser microphone with the plug-in power compatibility needs an
external power supply. Set the PLUG IN POWER switch to ON when using such
a microphone. (page 25)
A plug is connected to the line input.
Do not connect anything to the line input terminal. (page 25)
Recording from the built-in microphones
is impossible.
A plug is connected to the line input or microphone input.
Do not connect anything to the line input and microphone input terminals.
(page 25)
Only the left (Lch) audio of the external
microphone can be recorded.
A monaural microphone is connected.
When the connected microphone is monaural, set the microphone mode to
"MONO". (page 26)
Message "Please wait" keeps on displayed. An error occurred in the file system of this unit.
Perform forced formatting of this unit. (page 50)
The SD card contains a large number of files or folder levels.
This unit checks all of the files in the SD card in the beginning, so it may take a
long time if the SD card contains a large number of files.
This unit does not hold the conditions
before the power is switched off.
The resume function does not work.
An SD card is inserted.
When an SD card is inserted, this unit checks the files in it so the resume
function does not work.
USB connection has been used.
When USB connection is disconnected, this unit updates the internal database
so the resume function does not work.