Filter
Top Products
English45
• When the Line output is used, the sound mode is set automatically to "NORMAL". (page 34)
• Prepare an optimum audio cable (commercially available) according to the input terminal of
the connected external component.
• When using a FM transmitter, noise may be interfered depending the installation environment,
including the vehicle model, devices in the surroundings and the antenna positioning.
Stereo amplifier/
Car stereo
Cable with stereo mini-
plugs
Connection of external components
The Line output can be used to connect an external component such as a speaker with
built-in amplifier.
The USB connector can be used to connect an external component such as a stereo set
with USB capability.
Connecting to the Line outout
• For the operating procedure and the playable files, read the instruction manual for the
connected stereo set.
• Do not use or leave this unit or connected component in an automobile compartment with
high temperatures. Otherwise, equipment failure may result.
• The internal memory and the SD card are recognized as separate drives. If a drive cannot be
selected from USB-compatible stereo component, change the "Prioritized Drive" setting. (page
43)
• When the stereo component is switched off, the input selector is switched or the USB cable is
disconnected, the USB connection is canceled and the database of this unit is updated. If you
want to connect the stereo component with USB connection again, wait until the database
updating finishes.
Connecting to the USB connector
FM transmitter
Speaker with built-in
amplifier
USB-compatible stereo/
USB-compatible car stereo
USB cable