Filter
Top Products
English12
• When HOLD is on, is displayed on the screen during playback and recording.
Connecting stereo headphones
Connect the provided stereo headphones to this unit.
Entanglement-prevention slider
• Always hold the headphone bodies when attaching or detaching headphones. Pulling a cord
may result in malfunction.
• To prevent the headphone cord from being entangled, slide the entanglement-prevention
slider to fix the headphone bodies in position.
HOLD function
The HOLD function defeats all of this unit’s buttons and helps prevent erroneous
operation when this unit is carried in a bag, etc.
The HOLD function should be canceled before using this unit.
HOLD canceled
HOLD
(Red indication is
visible.)
Inserting/removing an SD card
This unit can play music stored in an SD card or recording music in an SD card.
Inserting the SD card
1 Switch this unit off.
Press and hold the Power/Menu button until the display is
turned off.
2 Insert the SD card.
Open the card cover.
Hold the SD card with the label side up and
the notched section on the right, and insert it
into the slot until it clicks.
Close the card cover.
Removing the SD card
1 Switch this unit off.
2 Take out the SD card.
Open the card cover.
Push the SD card until it clicks and then
remove your finger from the card. The card
pops up so that you can pull it out with
your fingers.
Close the card cover.
• When the SD card is inserted, is displayed on the screen during playback and recording.
• A special adapter is required to use a miniSD card, miniSDHC card or microSD card.
• The MultiMedia Card (MMC) cannot be used.