Filter
Top Products
28
English
4 Press the SET button.
• “ERASE (start track) – (last track)” appears in the display. (Ini-
tially, the start track and the last track are both the last track
number recorded on the CD-RW.)
• Press the CANCEL button if you do not wish to perform this
procedure.
5 If needed, use the MULTI JOG dial on the main
unit or press the 4 and ¢ buttons on the
remote control to set the number of tracks
preceding the last track that you want to erase.
• Please note that all tracks following the start track will be
erased. For example, when track 8 on an 11 track CD-RW is
assigned as the start track, tracks 8, 9, 10, and 11 will be erased.
6 Press the SET button.
• After “ERASE TRACK” is displayed, the selected tracks are
erased, and the normal display is returned to.
• The track to be erased is cleared from the music calendar.
• Tracks can only be erased from the end of the recording.
Notes
• Once a track is erased, the recording cannot be restored.
• Do not disconnect the power cord or subject the unit to the
vibration during an erase operation. Doing so may make it
impossible to play the CD-RW.
The DISC ERASE function clears all of the data recorded on a CD-
RW.
Caution
If the disc is damaged or there is disc related trouble, this function
may not be possible.
1 Load the unfinalized CD-RW to be edited, and
set the function to CDR.
• The number of tracks and play time are displayed.
2 When the unit is in the stop mode, press the
MENU button on the main unit (or the DISPLAY/
MENU button on the remote control while
holding down the SHIFT button).
3 Turn the MULTI JOG dial or press the 4/¢
button on the remote control until “DISC
ERASE” appears in the display.
4 Press the SET button.
• “ERASE DISC?” appears in the display.
• Press the CANCEL button if you do not wish to perform this
procedure.
5 Press the SET button.
• This procedure takes about one and a half minutes to perform.
During the procedure, the length of the level meter is used to
indicate approximately how much time is remaining until disc
erasure is complete. When complete, the normal display is
returned to.
Erasing all the tracks (DISC
ERASE function)
MIX BALANCE
STANDBY
PHONES LEVEL
MAXMIN
MULTI JOG
+–
POWER
REC LEVEL
2
1
4,5
XL - R5000 CD/CDR MULTIPLE COMPACT DISC RECORDER
12
3
4
5
6
78
10
+
10
9
PLAY MODE
REPEAT SET CANCEL
CONTROL
PITCH 0
PITCH
+
PITCH
–
SHIFT REC MUTING
REC
DISPLAYSYNCHROCD REC
CD EDIT FINALIZE MENU
POWER
CD 1
CD 2
CD 3
CD CDR
2
3
4,5
2
REMOTE CONTROL
RM-SXLR5000J
CANCEL
CANCEL
XL-R5000.book Page 28 Wednesday, March 29, 2000 6:37 PM