Filter
Top Products
5
Names of the Parts
POWER button and STANDBY lamp (for Canada and
U.S.A)
button and STANDBY lamp (for other countries)
Press to turn the power on or to put in standby. When the unit is in
standby, the STANDBY lamp is lit. (See page 10.)
CD trays 1, 2, and 3 (numbered from bottom to top)
Load CDs on these trays for 3-CD changer playback. (See page
11.)
Disc tray selector buttons (with current selection
lamp) and 0 (eject) buttons
Press to select one of the CDs loaded in the 3-CD changer. The
lamp on the button lights to indicate the currently selected tray. Use
the 0 (eject) buttons to open and close the corresponding disc
trays. (See page 11.)
CDR disc tray
Load a recordable CD-R or CD-RW in this tray for recording. CD
playback is also available using this tray.
FINALIZE button
Press to finalize a CD-R or CD-RW disc when recording on the
disc has been completed. (See page 29.)
EJECT 0
Press to open and close the CDR disc tray.
REC LEVEL control and lamp
Use to adjust the level of the source signal being recorded. (See
page 18 and 25.)
PHONES LEVEL control
Use to adjust the level of the volume being output to connected
headphones (not supplied).
PHONES connector
Use to connect headphones (not supplied) to this unit.
MIX BALANCE control and lamp
Use to control the mixing levels of two independent sources being
recorded. The lamp is lit during mixed recording. (See page 26.)
MIC connector
Use to connect a microphone (not supplied) to this unit. (See page
18.)
CDR CONTROL operation buttons
REC MUTING: Press to record silence during a recording. (See
page 19.)
SYNCHRO: Press to select synchronized start recording. (See
page 25.)
REC ¶: Press to put this unit in record pause mode for
manual recording. (See page 18 and 26.)
7 (stop): Press to stop recording or play of the CDR. (See
page 12 and 19.)
8 (pause): Press to pause play and recording. (See page 12.)
3 (play): Press to start play or recording (in record pause
mode) of the CDR. (See page 12 and 19.)
MULTI JOG dial
Depending on the mode, use to skip forward or backward through
tracks on a CD, change the clock settings, or select setting options.
(See pages 14, 16, 23, and 33.)
REC SOURCE SELECTOR buttons
Use to select the type of source to be recorded. (See pages 18 and
26.)
Display window
Displays the operation modes and other system information. (See
page 7.)
MENU button
Press to enter a menu option.
SET button
Press to enter a selection.
CANCEL button
Press to cancel an operation.
DISPLAY button
Press repeatedly to change the type of information that appears in
the display window information display.
Main Unit
STANDBY
POWER
CLOCK/
TIMER
XL - R5000 CD/CDR MULTIPLE COMPACT DISC RECORDER
PLAY
MODE
CD EDIT
CD REC
CD CONTROL
MIC
MAXMIN
PHONES
MIX BALANCECDR CONTROL PHONES LEVEL
CD
LINE
LINE
MIC
PLAY & EXCHANGE
3
-
CD
STANDBY
STANDBY/ON
DISPLAY MENU
DIGITAL
REC SOURCE SELECTOR
MIXING
CD
LINE
MIC
FINALIZE
MIN MAX
MULTI JOG
+–
CANCEL SET
REC
MUTING
SYNCHRO
EJECT
REC LEVEL
REC
XL-R5000.book Page 5 Wednesday, March 29, 2000 6:37 PM