Filter
Top Products
16
English
Up to 32 tracks can be programmed. Any tracks on CD1, CD2 and
CD3 can be selected.
1 Insert CDs that contain tracks to be
programmed.
• Tracks on a CD which has not been inserted cannot be played
even when they have been programmed. Operation will simply
move on to the next step in the program.
2 Press the PLAY MODE button while the unit is in
the CD stop mode to select PROGRAM.
• “PG NO PROGRAM” appears in the display when no program
has been made.
3 Press the SET button.
4 Select and enter the program source.
• The source can be selected in the reverse direction by turning
the MULTI JOG dial counterclockwise.
• When the SET button is pressed, the programming step and
track number flash.
• A disc loaded in the CDR cannot be selected.
5 Select and enter one of the tracks.
• When track 2 on the CD1 is selected for program 1:
• When the selection is entered:
6 Repeat steps 4 and 5 to program up to 32 tracks
(when you try to program more than 32 tracks,
“MEMORY FULL” is displayed).
7 Press the 3 button to start program play.
• The numbers of the tracks which have been played are cleared
from the music calendar, and they are displayed when program
play is completed.
• Operation stops automatically when all the programmed tracks
have been played.
To clear a track from the program
To delete a programmed track, turn the MULTI JOG dial (or press
the 4/¢ buttons on the remote) in the stop mode until the
desired track is displayed in the screen. Press the CANCEL button
to delete the track from the program. All the tracks following the
erased one will automatically decrease by one and will be renum-
bered. To clear the entire program, press cancel until “PG NO
PROGRAM” is displayed in the screen.
To change contents of the program
In the stop mode, press the SET button followed by the CANCEL
button. Programmed steps will be erased in reverse order each time
the CANCEL button is pressed twice. Continue erasing in this
manner until the desired step number is reached. Follow program-
ming steps to reprogram tracks after the desired step.
To check the contents of the program
To check what has been programmed while the tracks are being
programmed, press the 7 (stop) button, and use the MULTI JOG
dial (or press the 4/¢ buttons on the remote) to check.
Program Playback
MIX BALANCE
STANDBY
PHONES LEVEL
MAXMIN
MULTI JOG
+–
POWER
REC LEVEL
2 4,57 3,4,5
1
XL - R5000 CD/CDR MULTIPLE COMPACT DISC RECORDER
Normal display
(program mode canceled)
PROGRAM
RANDOM
Programmed
step number
Program source
Track number
MULTI JOG
SET
1. Select the source. 2. Enter the Selection
=CD1 += CD2 += CD3 +
MULTI JOG
SET
1. Select the track.
2. Enter the Selection
XL-R5000.book Page 16 Wednesday, March 29, 2000 6:37 PM