Filter
Top Products
9
www.insigniaproducts.com
3 Press or to select Ye s, then press OK/ENTER
to start the scan. If you do not want to scan for
channels, select No. A status screen appears
during the scan.
Your TV scans for channels in your area and
stores the information in the channel list. When
the scan is complete, your TV tunes to the first
channel in the channel list.
Automatically scanning for radio stations
To automatically scan for radio stations:
1 Make sure that you have the rod antenna
connected to your TV.
2 Press SCAN on the front of your TV. The
following screen opens.
3 Press or to select Ye s, then press OK/ENTER
to start the scan. If you do not want to scan for
radio stations, select No. A status screen appears
during the scan.
Your TV scans for radio stations in your area and
store the information in the radio station list.
When the scan is complete, your TV tunes to the
first station in the radio station list.
Adjusting a radio station’s frequency
To adjust a radio station’s frequency:
1 Make sure that you have scanned for radio
stations.
2 Tune to a radio station, then press or to
adjust the station frequency. Each time you
press or , the frequency moves 0.1 MHz.
Your TV automatically saves the latest selected
frequency.
Selecting a TV channel
To select a TV channel:
• To go to the next or previous channel in the
channel list, press CH+ and CH–. Pressing one
of these buttons skips any channels that are
not in the channel list. The channel list was
created when you scanned for channels.
• To select an analog or main digital channel,
press the number buttons for the channel.
• To select a digital sub-channel, press the
number buttons for the main digital channel,
press , then press the number for the digital
sub-channel.
• To tune to the last viewed channel, press
RECALL.
Note
You can press MENU or EXIT to exit the scan, but you
must run the scan again to create a complete radio
station list.
You can also scan for TV channels using the
on-screen channel menu. For more information, see
“Automatically scanning for TV channels using the
antenna” on page 12 or “Automatically scanning for
channels using cable TV” on page 13.
RF CH 12
4Found
Menu/Exit: Exit
Select OK:Confirm Menu:Exit
Do you want to proceed auto scan?
YesNo
Note
You can press MENU or EXIT to exit the scan, but you
must run the scan again to create a complete radio
station list.
You can also scan for TV channels using the
on-screen channel menu. For more information, see
“Automatically scanning for TV channels using the
antenna” on page 12 or “Automatically scanning for
channels using cable TV” on page 13.
You can save up to 50 of your favorite radio stations.
Favorite Stations 3
96.30MHzFrequency
Menu/Exit: Exit