Filter
Top Products
7
www.insigniaproducts.com
3 When charging is complete, disconnect the AC
adapter.
Connecting an antenna, cable TV, or
satellite TV
To connect an antenna, cable TV, or satellite TV:
1 Make sure that your TV is turned off and the AC
adapter is unplugged.
2 Connect a coaxial cable between the Antenna
jack on the back of your TV and an antenna,
cable TV, or satellite TV jack.
3 Turn on your TV, then press INPUT on the
remote control to open the Input Source list.
4 Press INPUT repeatedly or press or to select
TV, then press OK/ENTER.
Connecting a standard video device
To connect a standard video device:
1 Make sure that your TV is turned off and the AC
adapter is unplugged.
2 Connect an AV cable between the VIDEO IN jack
on the right side of your TV and the AV OUT
jacks on the video device.
3 Turn on your TV, then press INPUT on the
remote control to open the Input Source list.
4 Press INPUT repeatedly or press or to select
VIDEO, then press OK/ENTER.
Caution
Do not disconnect the AC adapter or car adapter until the
POWER ON/CHR indicator turns off.
Notes
• The battery indicator ( ) appears on the screen
when the power is running low.
• Charge the built-in, rechargeable battery with a
surrounding temperature of 41°F and 95°F
(5 and 35°C).
• The built-in battery may get warm when you are
charging it or operating your TV. This is not defect.
• Batteries contain chemical substances, so they should
be disposed of correctly. Follow the hazardous waste
guidelines in you area.
Note
If you are in an area with weak TV signals, you may
need an HDTV antenna to improve reception.
Unscrew the rod antenna, then connect an HDTV
antenna to this jack.
Note
You can also press TV to view TV.
HDTV antenna
Note
You can also press VIDEO to select the video device.
Standard video device