Filter
Top Products
Care and Servicing (Problems)
74
Care and Servicing (Problems)
Often Encountered Problems
Problem Things to Check Solution
Problem Things to Check Solution
No Power Power cord plugged in? Connect the power cord to
AC outlet.
Delayed Recording does
not work.
Program set to the correct
channel?
Reset the delayed
recording.
VCR power turned off/ Turn power off to activate
the timer.
Safety tab removed from
the videocassette?
Put cellophane tape over
the tab area, or use a
videocassette with the
safety tab intact.
VCR power turned off? Turn power off to activate
the timer.
Clock set to "--:--"? Set the time, then program
delayed recording.
Delayed recording does
not work even when the
clock is set correctly.
Has power failure of more
than one hour occurred?
When the autoclock set
function is operating, the
time may be reset even
after a power failure of
more than one hour.
However, programmed
delayed recordings will
have been cleared and
must be reset.
Does not record when you
press REC.
Safety tab removed from
the videocassette?
Put cellophane tape over
the tab area, or use a
videocassette, with the
safety tab intact.