Filter
Top Products
Basic Operations (VCR Plus + Recording)
49
2
Using VCR Plus+ to Record a Program
Now that your channels are set up, you can take advantage of this quick and easy
method of delayed recording. You will use the on-screen Easy Guide System, following
the basic procedure for delayed recording outlined on page 41. See the section on
Recording a Programmed for recording tips and programming priorities.
You set up the delayed recording using the on-screen Easy Guide System.
1. Press GUIDE, then press 1 to select VCR PLUS RECORDING and bring up this
screen:
2. Use the number buttons to enter the PlusCode of the program you want to record.
This code can be up to eight digits. If you enter a wrong digit, press CLEAR and enter
the correct one.
3. If you accidentally enter a nonexistent PlusCode, the VCR gives you an error
message that disappears from the screen in about 10 seconds.
4. If you have entered the correct PlusCode, press GUIDE to store the PlusCode in the
VCR's memory. This brings up another screen: