Filter
Top Products
Basic Operations (Tape Navigation)
51
Basic Operations (Tape Navigation)
Tape Navigation
Tape Navigation automatically stores the recording data (program title, recording date,
recording start time, channel, recording time, etc.) in memory and displays it on the TV
screen. You can see the contents of a tape at a glance so it is easy to locate the start of
a program you want to view and also locate the beginning of the non-recorded section
(for later recording).
Tape Navigation only functions when using a tape recorded by this VCR.
Tape Navigation stores tape data in memory. If the data is erased due to a memory
defect, etc., the registered data will not be able to be recovered.
The tape data is not erased even if a power failure occurs or the power cord is
unplugged from the AC outlet.
Quick Index of Tape Navigation Operation
1. To see the contents of a tape (tape data):
See "Displaying a Directory" on page 54. Prepare a tape recorded by this VCR.
2. To review the details of tape data in memory:
See the "DISPLAY TAPE NO. DATA" option on page 63.
3. To locate the beginning of the program you want to view or of the non-recorded
section:
See "Locating the beginning of a program you want to view or a non-recorded section"
on page 56. Prepare a tape recorded by this VCR.
4. To find how to store tape data in memory:
See "Storing tape data in memory" on page 58.
5. To clear tape data:
See the "DELETE TAPE NO. DATA" option on page 61.
You cannot erase the data of the tape loaded in the VCR. Eject the tape before
performing the procedure to erase its data.
6. When you do not want to store a program title in memory:
See the "PROGRAM TITLE <ON/OFF>" option on page 60.
7. When you do not want to use Tape Navigation:
See the "TAPE NAVIGATION <ON/OFF>" option on page 59.
Displaying a Directory