Filter
Top Products
◦ : LDKC number or CU number. Indicates that SSID is assigned to the all boundary
areas.
◦ : LDKC number or CU number. Indicates the boundary area with no SSID.
◦ : Indicates that no SSID is assigned to the boundary area.
• Set SSID list
Assigns SSID to the boundary area that contains LDEV numbers you set in this dialog box.
Information about the Set SSID list:
◦ LDKC: LDKC number of CU number where SSID is not assigned.
◦ CU: CU number where SSID is not assigned.
◦ LDEV boundary: Boundary area of LDEV number where SSID is not assigned.
◦ SSID: Assigned SSID. The initial value is blank.
• Input SSID list
Select or enter the SSID you want. You must be logged in as storage administrator to enter
an SSID.
• Set
◦ Input SSID: Sets the SSID you select or input from the Input SSID list.
◦ Set SSID: Updates the SSID you select or input from the Input SSID list.
• SSID number of another SLPR is used
When the SSID number of another SLPR is used check box is checked, you can enter the SSID
except for an SLPR that contains a parity group of your operation in the Input SSID list. When
the check box is not checked, you can only select the SSID of the SLPR that contains a parity
group of your operation.
SSID number of another SLPR is used appears only when you are logged in as a storage
administrator and more than two SLPRs exist. When the check box is not checked, Input SSID
is not accessible.
• Back
Maintains the settings in this dialog box while returning you to the Create V-VOL dialog box
(2).
• Next
Implements the settings in this dialog box and opens the Create V-VOL dialog box (4).
• Cancel
Cancels the operation and closes the dialog box.
Creating or Deleting Virtual Volumes 81