Filter
Top Products
Table 33 Cause of Error and the Result of RAID Manager Command (SSB) (continued)
Cause of ErrorRAID Manager CommandSSB2SSB1
Since you specified XP
Continuous Access Journal
S-VOL as the XP Snapshot
S-VOL, the pair cannot be
created.
Since you specified XP
Continuous Access Journal
journal volume as the XP
Snapshot S-VOL, the pair
cannot be created.
paircreate974c
Since the volume you
specified as the S-VOL has
an S-VOL Disable attribute,
the command ends
abnormally.
All commands974f
Since you specified the
volume with the VMA setting
as the XP Snapshot S-VOL,
the pair cannot be created.
paircreate9750
Since the Max LBA size of
the volumes you specified as
the XP Snapshot P-VOL and
S-VOL is different, the
command ends abnormally.
paircreate,
pairsplit,
pairresync,
pairresync -
restore
9752
Since the number of slots of
the volumes you specified as
the XP Snapshot P-VOL and
S-VOL is different, the
command ends abnormally.
paircreate,
pairsplit,
pairresync,
pairresync -
restore
9753
Since you specified the XP
Thin Provisioning V-VOL as
the XP Snapshot S-VOL, the
pair cannot be created.
paircreate,9754
Since you specified the XP
Business Copy reserved
volume as the XP Snapshot
P-VOL, the command ends
abnormally.
All commands9756
Since you specified the XP
Auto LUN Software source
volume as the XP Snapshot
P-VOL, the command ends
abnormally.
For information about using
XP Auto LUN, contact HP
technical support (see
“Contacting HP” (page 116)).
All commands9757
All commands9758
Troubleshooting When Using XP RAID Manager 109