Filter
Top Products
Table 4 SSBs and Causes of Error Issued Upon Rejection of RAID Manager Commands (continued)
Cause of ErrorRAID Manager CommandSSB
Because either XP Snapshot or XP
Business Copy is not installed, the
command ends abnormally.
paircreate pairsplit pairresync
pairresync -restore
9721
Because no additional shared memory
(FCV2, TPF, Extension is available, the
command ends abnormally.
All commands9723
Because no additional shared memory
(more than XP Snapshot) is available,
the command ends abnormally.
All commands9724
Because the LDEV number of the volume
you specified as the P-VOL is beyond
the specified range, the command ends
abnormally.
All commands9725
Because you specified the unmounted
volume as the XP Snapshot P-VOL, the
command ends abnormally.
All commands9726
Because you specified the blocked
volume as the XP Snapshot P-VOL, the
command ends abnormally.
paircreate, pairsplit, pairresync,
pairresync -restore
9727
Because you specified the volume that
is in process of formatting as the XP
Snapshot P-VOL, the command ends
abnormally.
paircreate, pairsplit, pairresync,
pairresync -restore
9728
Because you specified the volume
whose emulation type is other than
OPEN-V as the XP Snapshot P-VOL, the
command ends abnormally.
paircreate, pairsplit, pairresync,
pairresync -restore
9729
Because the volume you specified as
the XP Snapshot P-VOL has the
command device setting, the pair
cannot be created.
paircreate972a
Because the capacity of the volume you
specified as the XP Snapshot P-VOL
exceeds the supported size (4 TB), the
pair cannot be created.
paircreate972c
Because the capacity of the volume you
specified as the XP Snapshot S-VOL
exceeds the supported size (4 TB), the
pair cannot be created.
paircreate972e
Because you specified a V-VOL as the
XP Snapshot P-VOL, the pair cannot be
created.
paircreate972f
Because you specified a pool-VOL as
the XP Snapshot P-VOL, the pair cannot
be created.
paircreate9730
When the XP Snapshot P-VOL and XP
Continuous Access P-VOL share the
volume, the status of the XP Continuous
Access pair is other than PSUS or PSUE.
Therefore, the XP Snapshot pair cannot
be restored.
pairresync -restore9731
Status of the XP Snapshot Pairs 19