Filter
Top Products
PAGE 92
FIREBALL-MP INSTALLATION & USER’S GUIDE - M22002-01A1
CHAPTER 7 - CUSTOMIZING FIREBALL-MP
To Access FireBall-MP Utilities
u Press the SETUP key on the remote control or keyboard. The SETUP main
menu displays.
v Select the menu item utilities. The menu displays. (No other use of the system
is permitted while one of the utility processes is running.)
w Select the menu item you want to access and follow the instructions on the
screen.
system reset - performs a soft reset of the FireBall-MP. (This is the same as
holding the front panel power button in for 4 seconds to reboot)
conguration information - Displays the current FireBall-MP internal settings
including software versions, hardware versions, serial number, customer ID,
and network settings.
IR remote control - allows you to control FireBall-MP using the FB, TB, or PP
modes on the remote control. This is useful if you have more than one FireBall
in the same room, so that all FireBalls do not respond to the same IR codes.
x Exit SETUP by selecting the EXIT menu item located at the bottom of the main
menu, or by pressing the SETUP key when on the main menu or any sub-menu.