Filter
Top Products
PAGE 41
FIREBALL-MP INSTALLATION & USER’S GUIDE - M22002-01A1
CHAPTER 3 - GETTING STARTED
Text Entry Via the FireBall-MP Remote Control
The remote control can be used to enter text in all text elds. This text entry capability
is provided to allow you to ll out short text elds – such as those that occur in the setup
and edit screens. FireBall-MP’s IR keyboard should be used when extended typing is
required.
Entering Numeric Entry Mode
In elds where FireBall-MP expects only numeric characters to be entered (such as
phone number elds), an indicator will appear on the screen that displays the letters
“123” indicating that only numbers can be entered.
Typing Characters with the Remote
The remote control based text entry capability is similar to that provided on standard
telephones and cell phones. Each numeric key has characters associated with it that can
be accessed by pressing the key one or more times. You have .5 seconds after a key is
pressed to enter a second character from the same key. If you press the same key within
.5 seconds, the second character associated with that key replaces the initial character.
If you do not press the same key within .5 seconds, the text cursor moves to the next
location so that the same key can be pressed again to enter a second character.
2
Text entry is always in the Insert
Mode rather than in Overtype
mode.