Filter
Top Products
8
SECTION 2
SETUP
The SETUP menu shown in Figure 2-1 appears on startup. Always select
CONNECT RECORDER to read the settings of the attached RECORDER. The
top right half of the screen displays the Current Recorder Settings of the
RECORDER. Note the "Bad Chips" 0 of “X” for the HAWK, if you have any bad
memory chips in the RECORDER please call ADS and make arrangements to
have us repair the RECORDER at no cost to you. A RECORDER with some bad
chips is still usable, however the record time is reduced proportionately.
2.1 SETUP Settings - Descriptions and Functions
The RECORDER Clock is set to the same date/time as the PC; hence ensure
that the date/time on the PC is correct. The PC button configures the computer
time. The RECORDER button syncs the computer and recorder times. Refer
to Figure 2.1.1 Setup Menu. The Date/Time on the bottom of the screen is the
PC's, while the top of the screen displays the RECORDER Date/Time.
NOTE! The DATE format MM/DD/YYYY is set from the Windows CONTROL
PANEL. Hence if you want European format you can select it from "GLOBAL"
settings.
Figure 2.1.1 SETUP Menu