Filter
Top Products
16
ALARM OPERATION
• You have 3 wake up options:
Wake to radio;
Wake to the CD player; or
Wake to an electronic ‘chirp’ alarm.
Please note that whichever option you choose will apply to both Alarm 1 and
Alarm 2.
• Check the alarm time settings and the alarm mode setting and adjust them if
necessary. Refer to page 10.
WAKE TO THE CD PLAYER
1.) Set the MUSIC – BUZZ switch to ‘MUSIC’.
2.) Set the Function selector to ‘CD’.
3.) Set the AL 1, or AL 2, or both selectors to ‘ON’. The AL (Alarm) LED indicator
will come ‘On’.
4.) Load the desired CD in the player and press the POWER button to turn the
system ‘On’.
5.) When the disc begins to play adjust the VOLUME control to the desired level
to wake you up.
6.) Press the POWER button to turn the system ‘Off’.
At the selected wake up time the system turns ‘On’ and the CD begins to play. It
will continue for one hour, or until the end of the disc, and then shut off and reset
itself for the following day (depending on the alarm mode you selected). To stop
the disc sooner, press the POWER button. The disc stops immediately but the
alarm remains set. To cancel the alarm completely set the AL 1 or AL 2 or both
selectors to the ‘OFF’ position. The AL LED indicator goes ‘Off’.
CKD8300_ib071403.p65 14/7/2003, 15:0816