Filter
Top Products
11
SELECTING THE ALARM MODE
Your unit has 5 different Alarm Modes for each of the two alarms. After you set the
wake up times you have following wake up options:
Wake Up Option Display Indication
Monday Through Friday. 1 – 5
Saturday and Sunday Only. 6 – 7
Monday Through Saturday. 1 – 6
Everyday. 1 – 7
Sunday Only. 7 – 7
The days of the week are expressed numerically as follows:
1 = Monday.
2 = Tuesday.
3 = Wednesday.
4 = Thursday.
5 = Friday.
6 = Saturday.
7 = Sunday.
After setting the wake up time leave the AL 1 switch in the ‘ADJ’ position and press
the REPEAT/DAY button once. The display will show the Alarm Mode that is currently
selected for the Alarm 1, according to the chart shown above. Continue to press
the REPEAT/DAY button until the display shows the desired Alarm Mode. Then
set the AL 1 switch to the ‘ON’ or ‘OFF’ position and follow the same procedure to
set the desired Alarm Mode for Alarm 2.
To review or change the Alarm Mode setting at any time simply set the appropriate
AL (Alarm) switch to the ‘ADJ’ position and press the REPEAT/DAY button until
the desired Alarm Mode appears on the display, then set the alarm switch back to
the ‘ON’ or ‘OFF’ position.
CKD8300_ib071403.p65 14/7/2003, 15:0811