Filter
Top Products
82D-Link DSM-510 User Manual
Section 5 - Troubleshooting
9. How do I change the bit rate of an audio file?
There are various audio editing programs available for download on the Internet.
10. Why do my AVI files fail to play?
The DSM-510 will only support MPEG-4 encoded AVI files. You may need to re-encode your AVI files with a video encoding software
program, such as Nero Recode.
11. I cannot see anything when I turn on my DSM-510 player for the first time.
• Make sure your TV is displaying the appropriate video source. You may need to use the AV Input, Source, Select, or
TV/Video button on your TV or TV remote to change video sources. If you are having trouble changing the video source,
refer to the instructions that came with your TV.
• If you did not connect the player directly to your TV, but are instead passing the signal through your VCR, make sure
your VCR is displaying the appropriate video source. You may need to use the Input or Source button on your VCR
or VCR’s remote control. Some VCRs only pass the signal through when they are turned off. If you are having trouble
displaying the correct video source, refer to the instructions that came with your VCR.
• Make sure cables are connected to the IN jacks on your TV or VCR, not the OUT jacks.
• The cables you are using to connect your receiver to your TV or other equipment may be damaged or defective. Try
exchanging the cables connected to the receiver with other cables that you know are working properly.
• Make sure you have firmly attached the power adapter plug to the back of the player. Also, verify the power adapter is
plugged into a working power outlet and that the outlet is not controlled by a light switch.
12. My remote control isn’t working.
• Make sure the batteries are inserted correctly.
• Try removing the batteries and reinserting them without touching any buttons on the remote control.
• Replace the batteries with new ones.
13. The volume and mute buttons on the remote control don’t work when playing content that was encoded in 5.1 surround.
• The volume can only be adjusted on your digital stereo receiver. The DSM-510 can pass-through the audio signal to a