Filter
Top Products
16D-Link DSM-510 User Manual
Section 2 - Installation
Audio Connections
Select one of two ways to connect audio to your DSM-510:
Optical Digital Audio
•
Connect an optical audio connector into the S/PDIF connector on the DSM-510 and the matching opposite
end of the cable to the audio input of your audio system.
Note: This cable is not supplied.
Composite Audio/Video Connector
•
Plug the supplied 3.5mm mini-jack connector into the DSM-510. Plug the opposite end (the yellow
video cable and the red and white audio cables) into your television/receiver input.