Filter
Top Products
54
© 2005 Directed Electronics—all rights reserved
Dockable Media Player—
Installation
1. Be sure the media player is off, ensure power to the OHD console is off, and
that the ignition key is off.
2. Align the notches in the side of the media player with the tabs in the sides
of the monitor POD mounting area and slide the player into the monitor.
3. Slide the player towards the LCD screen until the lock/unlock button latches.
NOTE: Remove the rubber protective cover over the electrical connector at the bottom
of the media player before installing in the monitor POD mounting area. Store
the protective cover on the slot provided on the back of the media player for
reinstallation when the media player is unmounted.
NOTE: If the player doesn’t power up correctly, remove the player (see instructions
below) and then re-install.
Electrical
Connector
Lock/Unlock
Button
Insert Player
and then slide down
until unit locks.