Directed Electronics OHV1202 Portable Multimedia Player User Manual


 
16
© 2005 Directed Electronics—all rights reserved
Li-Ion Battery Recharging (DMP740
only)
The DMP740 comes with a Li-Ion rechargeable battery. Charge the battery com-
pletely before using the DMP740 for the first time by following the steps below:
1. Connect the supplied AC Adapter to AC outlet, and plug in the other end of
the AC Adapter to the DC in-jack of the media player.
2. While recharging, the power LED above the LCD screen will flash. If you turn
on the media player while recharging, you will see the power charging indi-
cation at the top of the LCD display.
3. When the battery is fully charged, the Power LED will stop flashing and the
charge indicator on the battery icon will disappear. Disconnect the AC
Adapter from the player.
NOTE: Charge only with the supplied AC Adapter.
NOTE: You can still operate while recharging; but the recharging time
will be longer.
NOTE: The unit should not be left on the AC adapter for long periods of
time after battery is fully charged. This could damage the bat-
tery. The unit should be played on the internal battery until it
is completely drained. If the unit is turned off for a month,
charge the battery to retain full efficiency and life. The battery
should be completely charged before use when fully discharged,
new, or after not being used for a long period of time. Due to
Power LED
Battery Charging
Indicator