Filter
Top Products
22
© 2005 Directed Electronics—all rights reserved
4. After connection is initialized, if your computer operating system fails to
recognize the media player as a hard disk, then go to [Device Manager] by
clicking "Start""Setting""Control Panel""System""Hardware", and
look for [DMP740 USB Device] under [Disk Drive] to check connection sta-
tus. If the connection is failed, you will not find under Disk Drives a drive
with a similar name such as [Toshiba MK4025GAS or DMP740 USB Device
or DMP040 USB Device] (this is the hard drive in the media player).
Repeat this procedure from step 2 to connect the media player to your
computer.
FOR SYSTEMS WITH WINDOWS 98SE
After connecting the media player to a Windows 98SE operating system com-
puter, the Windows system will detect the media player and ask to install driv-
er. Place the supplied driver CD in the CD-ROM drive, and refer to the Utility CD
section to complete the driver installation.
FORMAT MEDIA PLAYER AND DISK MAINTENANCE
NOTE: If you format the hard disk, all data on the hard disk will be
erased! You should first copy all the data to your PC before start-
ing the format procedure. The hard disk must be formatted using
FAT32. Then re-install system files and directory names from
your PC to the media player