Filter
Top Products
AXIS Q2901-E Temperature Alarm Camera
Detectors
-
+
000
000
000
000
000
000
0
0
A
C
B
D
D
t0
t1
t2
t3
t4
4. If detection type Above (A) or Below (B) is selected: Enter a Delay Time (D) in seconds.
Note
Alarms are triggered after the Delay time (D) has elapsed. In the example, an Above alarm is triggered between t1 and t2. A
Below alarm is triggered between t3 and t4.
5. Click Save to save your settings.
Show and Hide Detection Zones -
• To view all the detection zones, select View All Zones.
• To view only one detection zone, select the zone under Zone Name and click View Selected Zone.
Detection Zone Colors -
• The blue rectangle implies that you have selected a detection zone for editing.
• The green rectangle implies that no temperature alarm has triggered in the zone.
• The red rectangle implies that a temperature alarm has triggered in the zone.
Material Emissivity Table
The following table lists approximated emissivity values for a number of common material types.
For more information about emissivity, see the AXIS White paper Remote temperature monitoring available at www.axis.com
32