Filter
Top Products
AXIS Q2901-E Temperature Alarm Camera
Detectors
-
+
-
+
-
+
E
D
D
D
D
D
F
F
D
F
F
D
F
D
t0
t1
t2
t3
t4
G
G
G
G
G
D: Actual temperature increase in the zone
E: Temperature in the zone
F:
Your temperature increase rate, expressed in degrees (°C or °F) per seconds
G:
Measurement point that triggers or untriggers an alarm
Note
By default, maximum temperature in the zone is used as the base for detection type Increase.
- To edit emissivity settings in the zone: Select Advanced Settings and enter an emissivity value (0.50 – 1.00).
Different materials have different emissivity levels. See Material Emissivity Table on page 32.
5. For detection type Above (A) or Below (B): Enter the Detection Temperature in the zone.
30