Filter
Top Products
37
37
Target & Priority
If the AV 700 device is not listed, select “ARCHOS
™
Default”. You will
see a Priority box appear. This control is to allow you to select which
feature of the video to be guarded. If for example you are re-encoding
a video fi le that is 800x600 in resolution and 30 frames per second,
this is beyond the maximum resolution that the AV 700 can play. Thus,
the MPEG-4 Translator program will have to decrease the resolution.
Choosing LCD optimizes the fi nal video format for viewing on the built in LCD screen. Choosing the TV option will
optimize the movie to keep the highest possible frame rate. You can see what the size and frame rate will be by
looking at the Video Image Size : Destination parameters. When choosing TV , it is understood that the output
will be optimized for a television, and not the built-in screen.
Start
Click on Start and the program will call Virtual Dub to start processing
the video. Depending on the power and speed of your computer, this
could take real time (a 60 minute long video re-encoded in about
60 minutes) or much longer. As shown to the left, you will see the
progress as it processes the video fi le. If the Start button is grayed
out, it would be for one of two reasons. 1) The source fi le is not a
true AVI fi le. Even if the fi le name ends with .avi, the internal fi le data
determines if it is truly an AVI fi le. 2) The Virtual Dub program was not
located when MPEG-4 Translator was started up. Close the program,
restart it, and make sure you locate the Virtual Dub program.
38
38
1
1
0
0
MUSIC – Playing Music Files
MUSIC – Playing Music Files
When you click on the music icon in the main screen, you will be sent directly to
the ARCLibrary. From here you can choose to either browse your music by the fi le
system (Browse hard drive) or by music characteristics (Album, Artist, title, Genre,
Year). Use the LEFT, RIGHT, UP, and DOWN buttons to locate one of the factory
installed music samples and then click on PLAY. If you hear nothing at fi rst, make
sure you have adjusted the volume control on the headphone cord.
1. Current Directory
2. Play Mode: One Directory
3. Status: Playing
4. Battery level
5. Volume (maximum:99)
6. Artist* or parent folder
7. Album* or current folder
8. Song title* or fi le name
9. Next track to be played
10. Relative location in the track
11. Elapsed, remaining, and total song time
12. Time of Day
13. Album picture*
14. File format and rec info
15. Volume level meters
*If the fi le contains these tag data
6
7
8
9
10
11
1 2 3 4 5
12
13
14
15