A SERVICE OF

logo

Configuring the NetScaler Appliance for Web
Server Logging
On the NetScaler appliance you need to enable the Web Server Logging feature, and
you can modify the size of the buffer that stores the logged information before sending
the logged information to the NetScaler Web Logging (NSWL) client.
Enabling or Disabling Web Server Logging
Web server logging is enabled by default.
To enable or disable Web server logging by using the
NetScaler command line
At the NetScaler command prompt, type the following relevant commands to add or
remove Web server logging and verify the configuration:
w enable ns feature WL
w disable ns feature WL
w sh ns feature
Example
> enable ns feature WL
Done
sh ns feature
Feature Acronym Status
------- ------- ------
1) Web Logging WL ON
2) Surge Protection SP ON
.
.
.
24) NetScaler Push push OFF
Done
>
> disable ns feature WL
Done
sh ns feature
Feature Acronym Status
------- ------- ------
1) Web Logging WL OFF
2) Surge Protection SP ON
.
.
.
24) NetScaler Push push OFF
Chapter 4 Web Server Logging
94