Chapter 5
Configuring the Switch
46
48-Port 10/100 + 4-Port Gigabit Switch with WebView and Power over Ethernet
SNMP > Views
SNMP > Views
View Name The name of the SNMP view. Click the View
Name option and then select a view from the drop-down
menu.
New View Name Create a new SNMP view by clicking the
New View Name option and entering a view name into
the field.
Subtree ID Tree Shows the currently configured object
identifiers of branches within the MIB tree that define the
SNMP view. Click the Select from List option and select a
subtree from the list. To insert a subtree, click the Insert
option and specify an subtree ID.
View Type Indicates if the object identifier of a branch
within the MIB tree is included or excluded from the SNMP
view. Select the type from the drop-down menu.
Define a view name and specify subtree ID in the switch
MIB to be included or excluded in the view. Click Add to
save the new view.
SNMP > Group Profile
SNMP > Group Profile
Group Name The name of the SNMP group to which the
user is assigned. (Range: 1-32 characters).
Security Model The user security model; SNMP v1, v2c
or v3.
Security Level The security level used for the user:
noAuthNoPriv
There is no authentication or encryption
used in SNMP communications. (This is the default for
SNMPv3.)
AuthNoPriv
SNMP communications use authentication,
but the data is not encrypted (only available for the SNMPv3
security model).
AuthPriv
SNMP communications use both authentication
and encryption (only available for the SNMPv3 security
model).
Operation
Read The configured view for read access. (Range: 1-
64 characters)
Write The configured view for write access. (Range: 1-
64 characters)
Notify The configured view for notifications. (Range:
1-64 characters)
•
•
•
•
•
•
